lunes, 5 de marzo de 2012

Cajitas Everywhere!!!!!!!!!!

Little boxes everywhere!!!!!!!!

Proyecto de: Daf y Jesi.
Project of: Daf and Jesi.

Proyecto para: ESBOZOS
Project to: ESBOZOS

Aquí os traemos una nueva entrada, en este caso unas magníficas cajitas de la marca Plastcraftgames. La asociación Esbozos realizó una compra muy interesante a esta marca para realizar su nueva escenografía, asi que tocaba que Púleme Ésta! echase una mano en el material!
Here we bring you a new entry, in this case a wonderful little boxes of the brand Plastcraftgames. The association Esbozos made ​​a interestingpurchase to this brand for its new scenery, so touched that Púleme Ésta! cast forth a hand on the material!

Hay que reconocer que el pvc con el que trabaja esta marca es muy interesante para la escenografía. Os lo aconsejamos sin duda.
We must recognized that the PVC that this brand works is very interesting for the scenery. We definitely recommend it. 

Bueno, entrando en materia os vamos a comentar como montamos y pintamos unas pocas de estas cajitas que utilizaremos para dar cobertura en todas nuestras partidas de Infinity.
Well, going to the point we are going to tell you how we mount and paint a little amount of this little boxes that we are going to use to give cover in our games of Infinity.

Aunque no realizamos fotos del proceso, el montaje es relativamente sencillo. Las cajitas vienen en láminas y tan solo hay que utilizar el cutter para soltarlas de la matriz. Después es cuestión de perder 2-5 minutos intentando montar los cubos... es que había 3 tipos de caras diferentes! xD.
Although we do not make pictures of the process, the setup is relatively simple.The boxes come in sheets and just have to use cutter to release them the matrix. After losing a matter of 2-5 minutes to mount the cubes ... is that there were 3 different types of faces! xD.

pintado: 4º paso

En nuestro caso, después de pegar las caras con loctite, utilizamos una masilla para cubrir algunos huecos que quedaban por culpa de cortar un poco con prisas o incluso por no perfeccionar el corte antes de pegar (O porque somos unos maniáticos también xD).
In our case, after gluing the sides with loctite, we used a putty to fill some holes that were cut because of a bit rushed or not to refine the cut before pasting (or because we are also freaks xD).
Para pintar seguí los siguientes pasos:
To paint i follow the nexts steps:

- Imprimación: La realicé directamente con aero con gris oscuro.
-Primer: I realized it directly with the airbrush with dark gray.

- Enmascarar: Para simular desgaste en el color base, apliqué máscara líquida de vallejo en diferentes lugares con un trozo de espuma de blister.
-Masking: To simulet the wear on the coat base, I apply Vallejo's liquid mask in differents place with a piece of a blister's foam.

- Pintura base: Con aero damos unas cuantas capas con el color que nos apetezca.
- Base color: With airbrush we give a few layers with the color that we want.

- Suciedad en la cara pegada al suelo con un marrón. Para hacer este efecto diluimos mucho la pintura con
alcohol (HellLois me enseñó este truquillo :P).
-Dirt on the face close to the floor with a brown. To make this effect much paint dilute on alcohol (HellLois taught me this little trick :P).

No se que miraba pero tengo cara de pena :(

-Luz: un poco de la capa base más blanco para dar alguna luz al cubito.
-Light: A little layer of base coat and white to give some lights to the box.

-Después del último paso y tras dejar secar un tiempo, tenía ganas de quitar la máscara así que me puse a ello. Este paso siempre es el más divertido pero no tengáis prisa en hacerlo, sino fallareis como a mi me sucedió más adelante. Utilizamos un pincel de goma para frotar las caras del cubo y que salga la máscara.
-After the last step and let dry after a while, I wanted to remove the mask so I put on it.This step is always the most fun but do not be quick to do, because you will fail as happened to me later. We used a rubber brush to rub the faces of the cube and leave the mask.



-Si quereis darle otra capa de algún otro color por encima y quereis seguir manteniendo la armonía del desgaste es interesante hacer más desgaste a esta nueva capa.
En este caso quería poner a alguna de las cajitas una cruz simulando que son cajas sanitarias, así que puse más máscara líquida en algunas partes donde irían las cruces.
-If you want to give it another layer above some other color and you want to continue to maintain the harmony of the wear is interesting to wear more this new layer.
In this case I wanted to put some of the 
 litter boxes are simulating medical care boxes, so I put more liquid mask  in some parts where would be the crosses.

-Tras dejar secar, hice una plantilla con cartón en forma de cruz (lo siento, no tenemos fotos de esto :( ) y colocando bien la plantilla se pinta la cruz. En este caso la pinté a mano porque HellLois estaba usando el aerógrafo en ese momento.
After leaving it dry, I made a cardboard template with a cross (sorry, no photos available for this :( ) and placing corectly the template I paint the cross. In this case, painted by hand because HellLois was using the airbrush in that time.


-Se deja secar, no como yo que no lo dejé mucho tiempo y se corrió la pintura un poco.....y después se quita la nueva máscara dejando así los nuevos descorchones con el color base de la caja.
-Let it dry, not as I do that I didnt left a long time and the paint ran a bit ..... and then the new mask is removed leaving the new flakings with the base color of the box.

Realmente parecen muchos pasos, pero se hacen en un momento, sobre todo si se trabaja en serie.
It really seems many steps, but are made in a moment, especially if you work in series

Aquí se acabó el ladrillo de texto, ahora tocan fotos!!!!!!!!
Here finish the wall of text, now photos!!!!!!









Tenemos muchas más cajas que pintar, así que pronto nuevas y con diferentes símbolos!
We have many more boxes to paint, so soon new and differents symbols!

Un saludo!
Greetings!

3 comentarios:

  1. La verdad es que bien pintadas ganan un montón! Altamente recomendables :)

    ResponderEliminar
  2. Un verdadero espectáculo. Quedan absolutamente geniales, mi enhorabuena y gracias por el tutorial. ;-)

    Una preguntilla, si en lugar de mascara líquida se usa la técnica de la sal, me imagino que los resultados serían parecidos no?

    Por cierto que realmente interesante esa tienda de escenografía, habrá que apuntársela y estar atentos a ver que sacan.

    saludos! :)

    ResponderEliminar
  3. Gracias chicos!

    Nunca he probado la técnica de la sal pero la he visto por algunos sitios y supuestamente si debe quedar igual claro!, incluso mejor porque con esta máscara muchas veces si no la aplicas con cuidado quedan pegotes y el efecto es menos realista.

    un saludo!

    ResponderEliminar